Products

AMMUNITION LOADING HEAVY PRODUCTION MACHINE

USED AMMO LOADER MACHINE WITH .38/.357 CAL TOOLING

AMMUITION LOADER MACHINE WITH 9mm PARA. TOOLINGS

NEW,EXCEPT CASE, AMMO LOAD 10mm/45 LC+44 MAG TOO L

State of the art control system monitors 10 functions simultaneously to ensure that the finished ammunition will be of the highest quality. An automatic 14 inch case feeder and a 14 inch variable speed bullet feeder are standard equipment. The automatic primer feed system is assisted and monitored by an Air/Vacuum system.

Loader has 11 stations in line. It sequentially moves the case from left to right. Each station performs a process or inspection for the succeeding station, until the cycling of the machine produces a finished cartridge with each cycle. After the case leaves the case entry tube it moves to the first station where the machine probes for a case with nothing inside of it. This starts the progression as follows: size and deprime, primer pocket probe to assure the entire primer has been removed from the primer pocket, prime, powder drop, powder probe (for over and under charge)and case-mouth bell, initial bullet seating, finish-depth bullet seating and final sizing, crimp and bullet check. When the round exits the machine it is ready to fire.

AMMUNITION LOADING PRODUCTION EQUIPMENT

AMMUNITION LOADING PRODUCTION EQUIPMENT

AMMUNITION LOADING PRODUCTION EQUIPMENT

FOR PISTOL, RIFLE & SHOTSHELL TESTINGS

AMMUNITION VISUAL INSPECTION MACHINE

INSPECTION MACHINE FOR AMMUNITION & COMPONENTS

CLOSED CIRCUIT TV SYSTEM FOR EXTRACT/CRIMP MACHINE

82%

IN BALANCE OF NITROGEN OR OTHER BALANCE GAS